CONTACTO
Barcelona: +34 937418500 – barcelona@dachs.es
Madrid: +34 917994770 – madrid@dachs.es
Bilbao: +34 944630182 – norte@dachs.es
Barcelona: +34 937418500 – barcelona@dachs.es
Madrid: +34 917994770 – madrid@dachs.es
Bilbao: +34 944630182 – norte@dachs.es
TE: Standard Portfolio of GNSS Antennas
/0 Comentarios/en Antenas, Componentes Pasivos/por userTE Connectivity’s New BATTU Dual Wall Heat Shrink Tubing
/0 Comentarios/en Cables, Heat Shrink Tubing, Tube termoretractil/por userBATTU DUAL WALL HEAT SHRINK TUBING FOR POWER CABLES
• Supports faster installation with optimized sizes, ~2:1 shrink ratio and convenient cut lengths
• Provides electrical isolation, mechanical protection, moisture resistance and flame retardance
• Withstands operating temperatures to 130°C
TE Connectivity (TE) introduces its new BATTU heat shrink tubing. This flame-retardant, adhesive-lined tubing is made from a polyolefin jacket with a thermoplastic adhesive inner wall. It is specifically designed for power cable to terminal applications in harsh environments, such as battery cables in industrial and commercial vehicles. It provides excellent electrical isolation, mechanical protection and moisture-resistance. This semi-rigid tubing also offers a degree of strain relief, and it withstands operating temperatures up to 130°C. BATTU tubing has an approximate 2:1 shrink ratio, and has been optimized in size for fast application to speed production. Standard sizes accommodate typical power cables from 16-120mm2 (6AWG to 4/0 AWG). Additionally, it is provided in convenient cut lengths to help prevent splitting that might result from improper cutting on the plant floor. Offered in black, red, orange and yellow, it supports color coding and identification.
KEY BENEFITS
• Supports faster installation to speed production with sizes, shrink ratio and cut lengths optimized for power cable to terminal application
• Accommodates typical power cables from 16-120mm2 (6AWG to 4/0 AWG)
• Provides electrical isolation, mechanical protection, moisture resistance
• Retards flame per ISO6722
• Withstands harsh environments, including operating temperatures to 130°C
• Resists many common automotive fluids
TARGET MARKETS
• Transportation
• Industrial machinery
APPLICATIONS
• Commercial vehicles
• Industrial vehicles
• Consumer marine equipment
• Construction/agricultural equipment
• Generator sets
• Recreational vehicles
• Military vehicles
• Automobiles
Les invitamos a contactar con nuestro personal de DACHS ELECTRÓNICA para recibir todo el soporte técnico y comercial.
Dachs Electronica, S.A. Contact: info@dachs.es
Pol. Ind. Els Garrofers
info@dachs.es -Tel. +34 93 741 85 00
Diotec actualiza sus productos de protección Electroestática. SE1J – Diotec’s new ESD Protectifiers
/0 Comentarios/en Diodos y Rectificadores, Semiconductores discretos/por userIn today’s consumer and automotive electronics, the role of ESD protection is imperative for ensuring a system’s robustness under harsh transient conditions at system level. Diotec adds, for these applications, an ESD protected diode to its portfolio of Standard SMD rectifiers – a new member of Protectifiers®family!
The SE1J comes in a flat SOD-123 package, and features a repetitive peak reverse voltage of 600V with 1A of average forward current rating. It ensures robust ESD immunity up to ± 25 kV as specified for air discharge in compliance with IEC 61000-4-2 Industry standard.
This device is well suited for use in applications like 50/60 Hz mains protection, power supplies, polarity protection and many more.
Les invitamos a contactar con nuestro personal de DACHS ELECTRÓNICA para recibir todo el soporte técnico y comercial.
Dachs Electronica, S.A. Contact: info@dachs.es
Pol. Ind. Els Garrofers
info@dachs.es -Tel. +34 93 741 85 00
TE Connectivity: New additions to the HDSCS family offer extended design flexibility and solutions for CAN bus applications
/0 Comentarios/en Automotive seals and cavity plugs, Conectores, Conectores para automoción/por userTE Connectivity introduces new products, that expand the HDSCS connector series – one of the largest sealed connector series in the market – designed to meet the rigorous demands of the commercial vehicle industry and off-road applications that require the highest standards of performance. Made from a rugged UL 94-V0-rated thermoplastic material, HDSCS connectors have an integrated secondary lock with a poka-yoke feature that can be used for inline or flange mounted applications in a wire-to-wire or wire-to-device configuration. Rated to IP67 and IP6K9K (when used with a backshell), they are available in 5 housing sizes with 4 keying options. They are offered in arrangements ranging from 2 to 18 positions. Solutions for CAN bus architecture are also available. Harness the future of 48 V design with up to 60 V dc capability. Accessories include backshells, protection caps, cavity plugs, and fixing slides.
Les invitamos a contactar con nuestro personal de DACHS ELECTRÓNICA para recibir todo el soporte técnico y comercial.
Dachs Electronica, S.A. Contact: info@dachs.es
Pol. Ind. Els Garrofers
info@dachs.es -Tel. +34 93 741 85 00
TDK lanza nuevos Thin-Film metal power Inductors para automoción y aplicaciones ADAS (Advanced Driver Assistance System)
/0 Comentarios/en Inductores/por userMiniaturized thin-film metal power inductors suitable for ADAS applications.
Qualified to AEC-Q200
TDK Corporation (TSE:6762) announces the TFM252012ALVA thin-film metal power inductors that can be connected directly to a 12 V car battery while maintaining small dimensions with a footprint of just 2.5 mm × 2.0 mm and a height of 1.2 mm. Thanks to the magnetic metal core these newly developed inductors offer a rated current of 1.6 A and an inductance of 4.7 μH. Leer más